Cover image: Image created for illustrative purposes only to contextualize urban air quality challenges.
In the early hours of 9 November 2026, Delhi's AQI stood at 366 to 368, in the very poor category, with over 15 monitoring stations reporting numbers above 400. Could architecture help tackle future instances like these? Yes and no. A building cannot directly clean a city's air, but its design decides how much polluted air reaches the people inside and how much the building adds to the air outside.
Three design decisions shape how much of that air reaches the people inside any campus, office or home.
- What the site filters.
- What the envelope and ventilation let in.
- What the building and its construction add to the air around it.
What did India's air quality look like on 8 and 9 November 2026?

CPCB data reported on 9 November shows that of 54 Delhi stations with valid data, all recorded an AQI above 200, 50 were above 300 and 15 were in the severe category. Across the region, Bahadurgarh recorded 389, Ghaziabad 366 and Noida 340. Among 288 cities with data, the highest reading was 400 at Khora in Uttar Pradesh, while Aizawl in Mizoram recorded 19 and Madikeri in Karnataka recorded 39. The Commission for Air Quality Management had already invoked Stage III of the Graded Response Action Plan on 6 November, which restricts non-essential construction and demolition work. Readings change by the hour and by station, so these figures are a snapshot of the morning of 9 November.
Why does air quality matter for the people inside buildings?
A Lancet Planetary Health study covering 655 districts estimated that 16.6 million deaths between 2009 and 2019 were linked to PM2.5 above the WHO guideline. The same research found that mortality risk rose by 8.6% for every 10 ug/m3 increase in annual PM2.5. The WHO 2021 guideline for PM2.5 is 15 ug/m3 over 24 hours, while India's national standard is 60 ug/m3. That gap gives design teams a clear reason to plan for air quality from the first sketch.
How do buildings contribute to the air outside?

Reporting on the revisited IIT Kanpur and TERI emissions inventory attributes about 15% of particulate matter in Delhi to ongoing construction and about 4% to diesel generators. Each of these shares begins with a decision taken at the design stage. A construction sequence planned to limit dust-generating site operations, a power supply planned around rooftop solar to reduce reliance on diesel backup, and a cooling load reduced through passive design all lower what a building adds to its surroundings.
What reaches the people inside?
A Harvard-led study measured indoor PM2.5 for a year in 37 offices across China, India, the UK and the US. Indoor levels rose when outdoor levels rose, and in India the average workday indoor level exceeded the WHO 24-hour guideline on about 17% of days. Offices with MERV 15 or higher filters recorded about 39% lower indoor PM2.5 than offices with MERV 7 to 12 filters. This points toward a hybrid approach. Operable windows and natural ventilation serve well on clean days, and a well-sealed envelope with filtered fresh air serves occupants on severe days. Filtration uses energy, so it works best in a building whose passive design has already reduced its cooling load.
What can the site itself filter?
Researchers at Georgia State University found that roadside locations with vegetation had about 37% less soot and about 7% fewer ultrafine particles than similar sites without plants, along highways in metropolitan Atlanta. The effect applied to particulate matter only, and roadside plants did not reduce carbon dioxide or ozone.
This thinking guides the site plan of the HPCL Regional Office campus at Naya Raipur, which is under construction. The building is set back from the highway behind a deep landscape buffer designed to intercept dust. A basement for 46 vehicles keeps cars off the surface, and a single-direction loop is planned to limit idling.
Three questions to ask your design team
- How will the building perform on a day when the outdoor AQI is above 300, and what filtration grade supports it?
- What does the site plan place between the road and the facade?
- How will construction dust and backup power be managed, including on days when GRAP restrictions apply?
Frequently asked questions
Q. Can building design improve air quality?
Design can reduce how much polluted air reaches occupants and how much a building adds to local emissions. The air quality of a whole city depends on transport, dust, industry and regional sources, which a single building cannot change.
Q. What does an AQI of 301 to 400 mean?
The CPCB classifies 301 to 400 as very poor and anything above 400 as severe.
Q. Do trees and green buffers clean the air?
They can reduce particulate matter near roads, as the Georgia State study shows, and the effect depends on the site, the plants and the wind.
Q. Is natural ventilation still useful?
It remains valuable on clean days and for passive cooling, and a hybrid design adds filtered fresh air for days when outdoor air is poor.
Planning a campus, office or residence in a high-AQI region? The decisions that shape indoor air are made in the opening weeks of design. Bring air quality into that conversation.
Originally published by klimArt Architects on LinkedIn on 9 November 2026.
